/
Creating Device Exclusion Rules to Exclude Devices

Creating Device Exclusion Rules to Exclude Devices

You can create exclusion rules that specify which device to exclude by identifying the DNS name, SNMP name, or MAC address. You can also exclude a device directly. See Excluding Devices Directly .

  1. In Service Center, click Status > Onboarding Overview.

  2. Click the site that contains the device you want to turn monitoring off for.

  3. Click Legacy Exclusion Rules.

  4. Click New.

  5. Do any of the following:

    • In the DNS Name box, type the domain name for the device.

    • In the SNMP Name box, type the SNMP name for the device.

    • In the MAC Address collected via WMI, SNMP, or SSH box, type the MAC address for the device.
      The Media Access Control address (MAC address) is a unique identifier assigned to most network adapters or network interface cards (NICs) by the manufacturer for identification.

    • In the MAC address collected via ARP box, type the MAC address for the device, if it is collected using ARP.
      The MAC address collected via ARP box is only available for Onsite Managers that have been upgraded to Barracuda RMM 9.0 or higher.

  6. Click Save.

We value your feedback.
If you have questions, suggestions, or feedback on our documentation, contact the Campus Product Documentation team.
For general product inquiries or technical support, please contact the global Barracuda Support team.