How to Configure RIP Router Setup

After enabling and configuring RIP, set up your RIP router. This article provides instructions on configuring global settings and network definitions that are used by RIP to advertise routes.

This tab only has to be configured when RIP has been activated in the Operational Setup tab through setting the Run RIP Router parameter to yes. Specification of global RIP settings such as version, timers and authentication, and definition of interfaces on which the RIP process is to run, is done in this place.

Configure RIP Router Setup

Go to CONFIGURATION > Configuration Tree > Box > Assigned Services > OSPF-RIP-BGP-Service > OSPF/RIP/BGP Settings .
Click Lock.
In the left menu, select RIP Router Setup. In this section, the parameters can be specified as follows:
In the RIP Preferences section, accessible from the Configuration menu, the settings can be specified as follows:
Click Send Changes and Activate.