Microsoft Office Communications Server Deployment Example
This article applies to:
Barracuda Load Balancer running firmware version 3.3.1.005 or higher
Barracuda Load Balancer 340 or above
Microsoft ® Office Communications Server 2007 R2 Enterprise Edition
This article assumes you are connected to the Barracuda Load Balancer web interface and have an activated subscription.
Figure 1 illustrates a complete Office Communications Server deployment with Barracuda Load Balancers. This example is used in the deployment tasks in the article How to Deploy with Microsoft Office Communications Server.
In this example, the Edge deployment uses a Route-Path topology while the Front-End deployment uses a one-armed topology.
Figure 1. Office Communications Server Deployment Example
As shown in Figure 1, the firewall should not NAT inbound traffic addressed to the Edge deployment.
Refer to the Microsoft TechNet online library for more information on the following topics:
Next Step
Proceed to How to Deploy with Microsoft Office Communications Server .
Contact Us
Barracuda Campus
Barracuda Support