/
Configuring Multi-Gigabit Capacity

Configuring Multi-Gigabit Capacity

Feb 15, 2013

This article refers to firmware 4.2 and higher running on the Barracuda Load Balancer model 640 that include PORT1 through PORT10.

You can achieve multi-gigabit capacity on both the service and server side. Use the following steps to configure the interface on both the service and server:

  • Create bond0 with [ PORT1 PORT2 PORT3 PORT4 PORT5 ] in the Link Bonding section on the ADVANCED > Advanced Networking page.

  • Create bond1 with [ PORT6 PORT7 PORT8 PORT9 PORT10 ] in the Link Bonding section on the ADVANCED > Advanced Networking page.

  • Configure bond0 Interface Network IP in the Custom Virtual Interfaces section on the ADVANCED > Advanced Networking page.

  • Configure bond1 Interface Network IP in the Custom Virtual Interfaces section on the ADVANCED > Advanced Networking page.

  • Create a service on the bond0 Interface on the BASIC > Services page.

We value your feedback.
If you have questions, suggestions, or feedback on our documentation, contact the Campus Product Documentation team.
For general product inquiries or technical support, please contact the global Barracuda Support team.