vpnadminclt

To manage the VPN server, root users can use the vpnadminclt utility ( /opt/phion/bin/ ). Use the following syntax:

vpnadminclt <server>_<service> <command>

You can use the following commands with vpnadminclt:

Command	Description

Command	Description
kill <tunnel-name>	Terminates the specified site-to-site tunnel.
ipsechardkill <tunnel-name>	Terminates the specified IPsec site-to-site tunnel.
init <tunnel-name>	Establishes the specified tunnel.
disable <num> <tunnel-name>	Disables or enables the specified tunnel, as specified by the value of num where: num : -1 – Disables the tunnel. num : 0 – Enables the tunnel. num > 0 – Enable the tunnel for the specified <num> of seconds.
removestatus <vpn-tunnelname>	Removes status information for a group VPN tunnel.
showdynnum	Shows dynamic number.
--help	Displays help information.
killall vpnc	Kills the tunnel. For example, if the "VPN point of entry" has been changed while the remote management tunnel is initialized and the box still uses the old tunnel. Repeat until the following message is displayed: "No Process killed"