System Log Messages

System Log Messages

The following is the list of system log messages. Each log message includes the following types of information:

  • Log Category - The Severity Level of the log.

  • Log ID - The Event ID of the log.

  • Log Message - Description about the log.

Log Category

Log ID

Log Message

Notes

Log Category

Log ID

Log Message

Notes

SYSTEM

LOG_NOTICE

1003

Mem Start: SCB <Start Address>, Low <Start Address>, High <Start Address>

 

LOG_INFO

1012

 EVENTID_SYS_SHUTDOWN - Secure Traffic Manager is exiting

 

LOG_CRIT

1013

System startup failed at initializing: <stage>. Switching to maintenance mode

 

LOG_NOTICE

1024

Activate: Default boot image set to <Image Name>

 

LOG_ALERT

1119

(System is getting real hot) or (Possible overheating at device <device-name> temp reading=<temp in 'C>)

 

LOG_INFO

1122

This Hardware =<component-name> is not on the Board

 

LOG_ALERT

1125

SBC PII temp overshoot.

 

LOG_ALERT

1126

System highest temp has reached = <External temp 'C> <Internal Temp in 'C>

 

LOG_ALERT

1128

In Fan Group <Group ID> Fan <Fan ID> is Running at <Current Value> rps which is less than expected <default value>

 

LOG_NOTICE

1130

HW: Changing FAN speed <Old Value> -> <New Value> TempReadings (<Max internal 'C> <Max External temp in 'C>])

 

LOG_NOTICE

1203

SBC FAN <fan-name> detected rpm = <rpm value>

 

LOG_WARN

41001

Cookie Encryption Key is going to expire within <Number> days", REMAINING_DAYS_FOR_EXPIRY( pSharedKey->keyExpiryTimeout,curTimeInSecs)

 

MONITOR

LOG_CRIT

1014

[MON]: Shutting down all services

 

LOG_NOTICE

1014

[MON]: Shutting down services completed

 

LOG_NOTICE

1015

[MON]: Restarting services

 

LOG_NOTICE

1015

[MON]: Restarting services completed

 

LOG_ERROR

27001

SetMonitorAttributes: NULL monitor id\n

 

LOG_INFO

27001

SetMonitorAttributes: monitor (id 0x<internal-handle>) already exists. Deleting it

 

LOG_INFO

27002

Monitor (0x<internal-handle> - <IP:Port>) status is FEHC_INACTIVE

 

LOG_INFO

27002

Monitor (0x<internal-handle>) to <IP:Port> freed

 

ARP

LOG_WARN

4011

arprequest for <IP Address> failed with no memory

 

LOG_INFO

4012

ether address is broadcast for IP address <IP Address>

 

LOG_ERROR

4013

<Host IP Address> is using my IP address <IP Address>

 

LOG_ERROR

4014

Failed to find route for arp response to client <IP Address>

 

LOG_WARN

4015

arp: <MAC Address> attempts to modify permanent entry for <IP Address> on <Interface Name>

 

LOG_WARN

4016

arp_rtrequest: bad gateway value

 

LOG_ERROR

4017

arpresolve: can't allocate info for <IP Address>, rt=<route>

 

LOG_ERROR

4017

arp_rtrequest: malloc failed

 

CACHING (CACHE)

LOG_NOTICE

6001

System Low on Memory: Adjusting Cache Parameters - Current Max:<Max Size>, High:<High Water Mark>, Safe<Safe Water Mark>

 

LOG_NOTICE

6001

System Low on Memory: Adjusting Cache Parameters - New Max:<Max Size>, High:<High Water Mark>, Safe<Safe Water Mark>

 

LOG_NOTICE

6002

Cache Purged

 

LOG_NOTICE

6003

Cache purge failed: instance <Count>, thid <Thread ID>, table <Table ID>, target <Size>, collected <Freed Size>

 

LOAD BALANCER (LB)

LOG_ALERT

7005

Server <IP Address>:<Port> is enabled

 

LOG_ALERT

7006

Server <IP Address>:<Port> is disabled. New mode <Operational Mode>

 

LOG_NOTICE

7007

Server <IP Address>:<Port> is created

 

LOG_ALERT

7008

Server <IP Address>:<Port> is deleted

 

WEBLOG

LOG_WARN

9001

Configurations for start or stop time *MAY* not be proper.

 

LOG_ERROR

9003

Error: Unable to establish control connection.

 

LOG_ERROR

9004

Error: Unable to establish data connection

 

LOG_ERROR

9005

Error: Unable to establish ssl control connection

 

LOG_ERROR

9006

Error: Unable to authenticate the user

 

LOG_ERROR

9007

Error: Unable to transfer data to ftp server: <IP Address>

 

LOG_ERROR

9009

Connection to <IP Address> failed, error code = <Error Code>

 

LOG_ERROR

9009

SSL Connection to <IP Address> failed

 

LOG_ERROR

9010

Out of memory for formatting logs

 

LOG_INFO

9011

---- START OF LOG STATS FOR LOGS EXPORTED TO <IP Address>:<Port> ----

 

LOG_INFO

9011

Connection to <IP Address>failed, error code =<Error Code>

 

LOG_INFO

9011

Total number of logs: <Number>

 

LOG_INFO

9011

Total number of formatted: <Number>

 

LOG_INFO

9011

Total number of dropped: <Number>

 

LOG_INFO

9011

Total number of long url logs: <Number>

 

LOG_INFO

9011

Total number of control connection attempts to the ftp server: <Number>

 

LOG_INFO

9011

Total number of control connections successes: <Number>

 

LOG_INFO

9011

Total number of data connections: <Number>

 

LOG_INFO

9011

Total number of 4xx errors: < number >

 

LOG_INFO

9011

Total number of 5xx errors: <Number>

 

LOG_INFO

9011

Total number of ftp failures: <Number>

 

LOG_INFO

9011

Total number of requests: <Number>, Total duration: <Duration> secs

 

LOG_INFO

9011

---- END OF LOG STATS FOR LOGS EXPORTED TO <IP Address>:<Port> ----

 

LOG_INFO

9012

Web Logging enabled

 

LOG_NOTICE

9013

Dropping logs, running low on memory

 

LOG_ERROR

9013

Error in hash generation or encryption

 

LOG_NOTICE

9014

Logging parameters are set for vip <IP Address>:<Port>

 

LOG_INFO

9017

FTP Session to <IP Address>, status code = <FTP Status>

 

LOG_ERROR

9018

Unable to log the request since FTP server is slow or unreachable

 

LOG_ERROR

9018

Dropping logs since queue is full

 

LOG_ERROR

9019

Signature generation of logs failed

 

EVENT MANAGER (EVM)

LOG_ERROR

11001

Event Manager startup failure: could not handle signals

 

LOG_INFO

11005

Forwarding log messages to syslog host[<index>]=<ip_address>, facility=<facility> (socket=<socket_id>)

 

LOG_ERROR

11007

EnableSyslogService: create socket failed

 

LOG_ERROR

11008

fopen <log_filename>: <error_description>

 

LOG_ERROR

11009

<log_filename> write failed <error_description>

 

CONFIG AGENT (CONFIG)


We value your feedback.
If you have questions, suggestions, or feedback on our documentation, contact the Campus Product Documentation team.
For general product inquiries or technical support, please contact the global Barracuda Support team.