How to Manage Quarantine in SecureEdge

How to Manage Quarantine in SecureEdge

Quarantine Management provides an immediate, fleet-wide blocking capability in SecureEdge. With a single action, you can block a user, an IP address, or a domain across every SecureEdge policy, stopping threats before they spread. Quarantine entries can be created automatically by Barracuda XDR through Automated Threat Response (ATR) or added manually by an administrator. You can manage all entries from the Quarantine Management page, where you can search, filter, add, and remove entries.

This article explains how Quarantine Management enforcement works, how to view and manage quarantine entries, and how to manually add or remove entries in SecureEdge Manager. It covers the following contents:

Note that manually added entries do not require the XDR integration.

Requirements and Limitations

  • You need a SecureEdge Access subscription (DNS Access, Internet Access, Private Access, or Premium Access) or SecureEdge Sites. Quarantine Management is included at no additional cost.

  • To receive entries from Barracuda XDR, the Barracuda XDR ATR integration must be configured. For more information, see How to Configure Barracuda XDR Automated Threat Response (ATR) in SecureEdge.

  • Only IPv4 addresses are supported. IPv6 addresses are not supported.

  • Wildcard domains, such as *.example.com, are not supported.

  • When Barracuda XDR provides a URL, only the domain is quarantined; the URL path is removed.

  • For users authenticated through site authentication, quarantine may remain in effect after the user logs out of the SecureEdge Agent. The quarantine can continue for up to 24 hours or until another user logs in.

  • Quarantine Management supports blocking through ACLs and Web Filtering. Blocking ZTNA access is not yet supported.

  • Quarantine Management supports IP address blocking. Blocking Ingress NAT IP addresses is not yet supported.

How Quarantine Is Enforced

When you quarantine a user, IP address, or domain, SecureEdge Manager blocks the target across the applicable SecureEdge policy engines. Quarantine is enforced through hidden, highest-priority block rules applied to Site ACL, Edge Service ACL, and Web Filter policies. These block rules do not appear in the Network ACL or Web Filter tables.

Target type

What is blocked

Target type

What is blocked

User

All traffic from the user through Site ACL and Edge Service ACL, and all web categories through Web Filter.

IP address

All traffic to the address through Site ACL and Edge Service ACL. Private IP addresses are blocked in both directions.

Domain

Traffic to the domain through Site ACL and Edge Service ACL, and through Web Filter.

Note the following:

  • User quarantine applies only to enforcement points that identify users, including SecureEdge Access and DNS Locations configured for user awareness. IP address and domain quarantine apply across all enforcement points.

  • Quarantined users can still log in to the SecureEdge Access client, but cannot access resources.

  • Quarantined users see the standard ACL or Web Filter block page, not a quarantine-specific page.

Open the Quarantine Management

  1. Go to https://se.barracudanetworks.com and log in with your existing Barracuda Cloud Control account.

  2. The chosen Tenant/Workspace is displayed in the top menu bar.

  3. From the drop-down menu, select the workspace you want to configure Quarantine for.

  4. Go to Security.

  5. Expand the Security menu on the left and select Quarantine.

  6. The Quarantine management page opens.

    00-security-nav.png

Each row in the Quarantine Management list includes:

  • An icon indicating the target type (user, IP address, or domain)

  • The quarantined value (email address, IP address, or domain)

  • The description, if one was provided when the entry was added

  • The source (XDR for entries created by Barracuda XDR, Manual for entries added by an administrator)

  • The date the entry was added

  • A delete icon to remove the entry

Quarantine Management entries cannot be edited. To modify an entry, remove the existing entry and add it again. Entries must be added or removed individually. Bulk add and bulk delete operations are not supported. Entries do not expire and remain in effect until manually removed.

When the list exceeds 10 entries, it paginates. Use the items-per-page selector and the navigation controls < > at the page bottom to move between pages.

Add a Target to Quarantine

  1. On the Quarantine Management page, click Add to quarantine in the upper-right corner.

  2. The Add to quarantine window opens. Specify values for the following:

    • Select what to quarantine – Choose the target type:

      • User email – Blocks a user, identified by e-mail address.

      • IP address – Blocks an IPv4 address.

      • Domain – Blocks a domain, for example example.com.

    • Email address / IP address / Domain – Enter the value to quarantine. The field label changes to match the selected type.

    • Description (optional) – Enter the reason for quarantining this target, up to 255 characters. Only manually added entries can carry a description; entries created by Barracuda XDR have no description.

      ip-add.png
  3. Click Add to quarantine.

The Add to quarantine button stays disabled until you enter a valid value. If the value does not match the selected type, an error is displayed below the field.

After the configuration is complete, you can see that the message Added <target> to quarantine is displayed, and the new entry appears at the top of the list with the source Manual. The block takes effect on your enforcement points within a few minutes, after the configuration is synchronized.

quarantine-table.png

Remove a Target from Quarantine Management

Removing an entry restores access for the target. You can remove entries created by any source, including Barracuda XDR.

  1. On the Quarantine management page, locate the entry you want to remove.

  2. Click the delete icon at the end of the row.

  3. The Remove window opens with the message: "This will restore access for <target>. This action cannot be undone."

    remove.png

     

  4. Click Remove.

After the configuration is complete, you can see that the message Removed <target> from quarantine is displayed and the entry no longer appears in the list.

When no entries remain, the page displays No quarantined entities.

Find Quarantined Entries

Search

Type in the Search entities... field. The list updates as you type, and the matching text is highlighted in both the entry value and the description. Click the X in the field to clear the search.

search.png

If nothing matches, the page displays No results found. Click Clear search and filters to show the full list again.

Add Filter

  1. Click Filter. The Filters panel opens.

  2. Select one or more options:

    • Type – User, Public IP, Private IP, Domain. Use Select all to select every type.

    • Source – XDR, Manual. Use Select all to select every source.

    filter.png
  3. Click Apply.

After the configuration is complete, you can see that each active filter is displayed as a chip below the search field and the list shows only matching entries. To remove a single filter, click the X on its chip. To remove all filters, click Clear all filters.

selection-filter.png

Sort

By default, the list is sorted by the time each entry was added, newest first.

  1. Click Sort: time added.

  2. Under Sort by, select Time added or Alphabetical.

  3. Under Order by, select the sort direction. For time-based sorting, select Newest or Oldest.

    sort.png

     

Further Information

 


We value your feedback.
If you have questions, suggestions, or feedback on our documentation, contact the Campus Product Documentation team.
For general product inquiries or technical support, please contact the global Barracuda Support team.