Verifying DLP Policy Enforcement Events in DLP Logs
You can view and verify Data Loss Prevention (DLP) policy enforcement events in DLP Logs to confirm that your DLP policies are detecting and acting on sensitive data as expected.
Before You Begin
You must have a valid Barracuda SecureEdge Premium Access subscription.
You must create DLP policies in your workspace on the Data Loss Prevention > Policies page. For more information, see How to Create a DLP Policy.
Open DLP Logs
Go to
Barracuda SecureEdge and log in with your existing Barracuda Cloud Control account.
From the drop-down menu in the top menu bar, select the workspace you want to verify DLP enforcement events for.
Go to Reports > Logs and select DLP Logs.
The DLP Logs window opens. By default it shows the following columns:
Time – When the event was recorded.
User – The enrolled user whose traffic was scanned.
Severity – Warning, Informational, or Error.
Policy Name – The DLP policy that matched.
Domain – The destination the content was being sent to.
Source IP – Shows the source IP address.
File Name – Displays the file name.
Messages – Displays the message.
To change the period shown, edit the Date range for the DLP Logs log, or use the period drop-down above the chart. The Date range field displays in the format
MM/DD/YYYY - MM/DD/YYYY. You can choose a date range between Last 30 days, Last 7 days, Yesterday, and Today.The Date range filter includes time-of-day granularity, enabling more precise searches and analysis within specific time windows. Enter Start time and End time.
For example, in this case, select as your date range Last 7 days.
A chart on the DLP Logs page shows queried data for the Last 7 days date range, including the following information:
DLP Logs can be visualized by hour or day using the chart view. Use the line chart to identify trends over time, and use the bar chart to compare event volumes across specific hours or days. You can switch between the line and bar chart views using the icons to the right of the chart.
The page navigation icons are numbered, and you can set up to 100 items per page.
The option Refresh refreshes the current list. By default, the refresh time is set to 30 minutes.
You can create custom logs and save them. For more information, see How to Create Logs in SecureEdge.
Click Refresh to reload the log table with the updated range.
To edit the DLP Logs chart columns, click Edit Columns. The Table Columns window opens. Select or deselect field names under each section and click Apply.
After the configuration is complete, you can see each upload your DLP policies scanned, which policy matched, and which data types were detected. To save a filtered view for reuse, click Save As. Saved views appear under My Log Views at the top of the Logs list.
Group Log Entries by Column
To group DLP log entries by a specific column (for example, Policy Name or User):
Click and hold a column header, for example, Policy Name.
Drag the column header to the grouping bar above the table that reads Drag a column header and drop it here to group by that column.
Release. The log entries are now grouped by the selected column.
Save a Custom DLP Log View
To save your current filter and column settings as a reusable log view:
Apply the filters and column configuration you want to save.
Click Save As in the top-right corner.
Enter a name for the custom view and confirm. The saved view appears under My Log Views in the left panel for quick access in future sessions.
(Optional) Filtering and Sorting Features
You can sort or add filters to view specific content in the DLP Logs. To reset the filter, click X.
Add Filters
To view specific entries in the table, add filters. Select the criteria you want to search for, and then click Apply.
To filter by Severity, click the funnel-shaped filter icon in the Severity column header and a values:
Critical – A critical-severity DLP violation was detected.
Fatal – A fatal-severity DLP violation was detected.
High – A high-level detection was recorded.
Informational – An informational event was detected.
Low – A low-level detection was recorded.
Medium – A medium-level detection was recorded.
Other – An other type severity detection was recorded.
Unknown – An unknown type severity detection was recorded.
To filter by a specific DLP policy, click the funnel-shaped filter icon in the Policy Name column header and select the policy name you want to verify.
For example, PCI-DSS Compliance.
The log table updates to show only the events that match your selected filters. Each row in the DLP Logs table displays data from the selected field name column.
Sorting Features
You can filter and sort each column on the DLP Logs page to view specific entries. To sort the DLP Log table:
Click the sort icon (↑↓) next to the column header.
Further Information