Use the Barracuda Web Security Gateway as a secure intermediary between HTTPS requests and destination web servers to apply granular control to applications and sub applications you want to block or allow. If you only need to block domains and content categories, then you can use the HTTPS Filtering feature instead. See HTTPS Filtering With the Barracuda Web Security Gateway. SSL Inspection is a resource-intensive feature, and it can, under certain configurations, result in an impact on performance.

Configure SSL Inspection for Barracuda Web Security Gateway 310

1. Log in to the Barracuda Web Security Gateway web interface, and go to the BLOCK/ACCEPT > Configuration page.

2. Set SSL Inspection to ON.

3. Select whether to use the default Barracuda Networks root certificate or create your own self-signed certificate. Barracuda Networks recommends creating your own self-signed certificate. To create one, click Create Certificate and follow instructions.

   Open

   

4. Click the Download button next to Root Certificates For Browsers, and save the file to the Trusted Root Certificate path. If the certificate is installed to the personal path, it will not work correctly. The certificate must be installed on all remote devices that will be SSL inspected.

5. Install the certificate file as a trusted root certificate in all client browsers. If you want to enable users to install the certificate in their browsers, see the note above.

Configure SSL Inspection for Barracuda Web Security Gateway 410 and higher

1. Log in to the Barracuda Web Security Gateway web interface, and go to the ADVANCED > SSL Inspection page.

2. Set SSL Inspection to ON.

3. Select whether to use the default Barracuda Networks root certificate or create your own self-signed certificate; Barracuda Networks recommends creating your own self-signed certificate. To create one,  click Create Root Certificate under Available Certificates and follow instructions in the wizard. If you are deploying multiple Barracuda Web Security Gateways, you can upload a root certificate from one Barracuda Web Security Gateway to the others in the cluster. Use Upload Certificate to install the certificate.

   Open

   

4. Click the Download button in the table under Client Certificate for the certificate you want to install on clients and save the file to your trusted root certificate path. If the certificate is installed to the personal path, it will not work correctly. The certificate must be installed on all remote devices that will be SSL inspected.

5. Install the certificate file in all client browsers. If you want to enable users to install the certificate in their browsers, set Enable Browser Certificate Download to Yes. To require users to authenticate before downloading the certificate, set Enable Browser Certificate Download to Yes.

6. In most use cases, no further configuration is necessary for the Barracuda Web Security Gateway to SSL inspect sites and applications you specify on the BLOCK/ACCEPT > Web App Control page and the BLOCK/ACCEPT > Web App Monitor page. However, you can also choose to enter specific domains to exempt from SSL Inspection, and/or specific users, domains, networks or content filter categories to SSL inspect.

7. Optional: configure specific application of or exemption from SSL Inspection. Click Help on the ADVANCED > SSL Inspection page for more configuration details.

   • Inspected Domains – Enter domain names that you want inspected and filtered at the URL level. You only need to specify domains to inspect if you want to show entire URLs in reports on web requests. 

   • Content Filter Categories – Using the check boxes in the Categories List, you can add or remove content filter categories to/from the list of categories that you want to be inspected. 

   • Inspected Users/Groups – If you want to add specific domains to inspect, you must first choose one or more users or groups (e.g. All Users, Authenticated Users, etc.) for which you want to apply SSL Inspection. Note that if you choose Unauthenticated Users, SSL Inspection will not be applied to Barracuda WSA clients because they are always authenticated with the Barracuda Web Security Gateway. Additionally, if you select an LDAP group, any Barracuda WSA users not in that group will not be subject to SSL Inspection.

   • Inspected Networks – Enter the IP address and Netmask in the table for any network(s) for which you want to ssl inspect traffic. 

   • Exempt Domains – Optionally add any domains you want to bypass SSL Inspection. For example, if you have enabled any of the SafeSearch categories in the Safe Browsing section of the BLOCK/ACCEPT > Content Filter page, you might want to exempt one or more domains from Safe Search.

Advanced Settings

These features are configured in the SSL Inspection Options section of the ADVANCED > SSL Inspection page.

• Enable SSLv2 Proxy Support – To mitigate the risk of SSLv2 related POODLE vulnerability on the internal interface of the Barracuda Web Security Gateway, SSLv2 is turned off by default. If you have a legacy browser or web client inside the organization that is being SSL inspected and supports only SSLv2 or below, you could possibly experience an outage. Setting this feature to Yes enables SSLv2 for your legacy browser or web clients that use it, avoiding an outage.

• Enable SSLv3 Proxy Support – To mitigate the risk of SSLv3 related POODLE vulnerability on the internal interface of the Barracuda Web Security Gateway, SSLv3 is turned off by default. If you have a legacy browser or web client inside the organization that is being SSL inspected and supports only SSLv3 or below, you could possibly experience an outage. Setting this feature to Yes enables SSLv3 for your legacy browser or web clients that use it, avoiding an outage.

• Use TLSv1 for SSL Inspection – Client browsers can use either TLSv1.0, v1.1 or v1.2, in general, to connect to the Barracuda Web Security Gateway proxy. The proxy uses TLSv1.2 to connect to servers. This feature relates to the Barracuda Web Security Gateway server side setting and should be set to Yes if you want to perform selective SSL Inspection for websites that only support TLSv1.0. Otherwise, set to No.

• Validate Certificates – Setting to Yes means that, when doing SSL Inspection, the Barracuda Web Security Gateway will perform validation of the certificate of the server (website) the client is visiting in order to verify the identity of the server. Setting to No means that this check will not be performed. You might set this option to No if your firewall already performs this function.

• Server Domain Checking – Setting to Yes means that, when doing SSL Inspection with the Validate Certificates feature enabled, the Barracuda Web Security Gateway will check the CN field (Common Name) - or the SAN field (Subject Alternative Name), if present - in the server certificate, and verify whether or not it matches the domain name of the server. Setting to No means that this check will not be performed. You might set this option to No if your firewall already performs this function.

SSL Inspection Modes by Model

Table 1.

(1) Available with version 10.0 and above

The Barracuda Web Security Gateway 310 Vx does not support SSL Inspection.

Using SSL Inspection With the Barracuda Web Security Agent

If you have remote users with Macs or Windows laptops outside the network running the Barracuda Web Security Agent (WSA) with the Barracuda Web Security Gateway, you can configure the Barracuda Web Security Gateway to SSL Inspect HTTPS traffic. See SSL Inspection With the Barracuda Web Security Agent.