SC2
SC2 Top View
SC2 Front View
Default Port Configuration
Port Label | OS Notation | Speed/Type | Management Port |
|---|---|---|---|
WAN | eth1 | 10/100/1000 MBit RJ45 | (Management Port) |
LAN1 | eth0 | 10/100/1000 MBit RJ45 | n.a. |
LAN2 | eth3 | 10/100/1000 MBit RJ45 | n.a. |
LAN3 | eth4 | 10/100/1000 MBit RJ45 | n.a. |
OTG | - | Micro USB B | n.a. |
Hardware Specifications
Warranty and Safety Instructions
Opening your Barracuda Networks appliance or removing its warranty label unless instructed to do so by Barracuda Networks support will void your warranty and hardware support. Barracuda Networks Appliance Safety Instructions
The Secure Connector hardware appliances ship with a Quick Start Guide. Follow this guide to connect to your appliance. To protect your network, follow the instructions for the standard deployment.
If required, you can reset the configuration on your Secure Connector hardware appliances. For more information, see Secure Connector Troubleshooting.
Do not operate the appliance simultaneously with both 12V DC and Power over Ethernet (PoE) as parallel power sources. Barracuda Networks recommends to disable PoE if 12V DC is connected.
Power Supply is not included in packaging and needs to be ordered separately (BNGFSCAPSUa)
To prevent damage, connect the DC plug to the appliance before plugging the power adapter into the AC outlet.
SC2 model | SC20 | SC21 | SC24a | SC25a |
|---|---|---|---|---|
1x 1GbE WAN (PoE recipient) | Yes | Yes | Yes | Yes |
3x 1GbE LAN (switch) | Yes | Yes | Yes | Yes |
USB 2.0 | Yes | Yes | Yes | Yes |
USB OTG | Yes | Yes | Yes | Yes |
Wi-Fi (AP or client mode) | No | Yes | No | Yes |
3G/UMTS | No | No | Yes | Yes |
4G/LTE Europe | No | No | Yes | Yes |
4G/LTE Global (Universal) | No | No | Yes | Yes |
DIN rail mount | Yes | Yes | Yes | Yes |
Wall mount | Yes | Yes | Yes | Yes |
Metal Case (Magnetic mount) | Yes | Yes | Yes | Yes |
Support for Modem M30/M40/M41 | Yes | Yes | No | No |
Interface | |
|---|---|
WAN RJ45 Ethernet NICs | 1 x 1 GbE WAN (PoE+ recipient) |
LAN RJ45 Ethernet NICs | 3 x 1 GbE LAN switch |
USB 2.0 | 1 |
Micro-USB OTG | 1 |
Wi-Fi 2.4GHz | - |
Supported Cellular Networks | |
UMTS | SC24a, SC25a |
LTE | SC24a, SC25a |
System |
|
CPU | ARM Cortex A7 |
RAM [GB] | 1 |
Mass Storage |
|
Type | Micro SD |
Size [GB] | 16 |
Size, Weight, Dimensions |
|
Appliance weight [kg/lbs] | 0.55/1.21 |
Carton weight with appliance [kg/lbs] | 0.9/1.98 |
Appliance size: width x depth x height [in] | 1.5 x 5.5 x 5.9 |
Appliance size: width x depth x height [mm] | 37 x 140 x 150 (For more information, see Barracuda SC2 Measurements) |
Carton size: width x depth x height [in] | 2.6 x 9.1 x 10.8 |
Carton size: width x depth x height [mm] | 65 x 230 x 275 |
Form factor | Compact, Din rail |
Hardware | |
Cooling | No fan |
Environmental | |
Noise emission [db/A] | n.a. |
Operating temperature [°C/°F] | 0 to +40 / +30 to +105 |
Storage temperature [°C°F] | -20 to +70 / -5 to +160 |
Operating humidity (non-condensing) | 5% to 95% |
MTBF (system) |
|
MTBF [yrs.] | > 5 |
Certifications & Compliance | |
CE emissions | Yes |
CE electrical safety | Yes |
FCC Class A | Yes |
Power & Efficiency | |
Aux DC in voltage range (2 pin MC420 3.5mm) | 12V - 57V |
WAN Port PoE+ Voltage range | 37V - 54V |
Compatible PoE+ provider (PSE) | IEEE 802.3at (Type 2) PD |
DO NOT USE 12V DC AND PoE ON WAN PORT AT THE SAME TIME | |
Power Supply (optional) | |
Power supply | Single, external |
Power supply type | External |
Power supply input voltage | 100 - 240 V, AC |
Power supply frequency [Hz] | 50 - 60 |
Power supply output voltage | 12V, DC |
Wattage / max. power draw [W] | 40 |
Max. power draw [Amps] | 3.33 |
Max. heat dissipation [W] | 40 |
Max. heat dissipation [BTU] | 205 |
Energy efficiency [average] | > 83% |
Packaging Content | |
Appliance | Yes |
Straight network cable | Yes |
USB Type A to MicroUSB cable | Yes |
External power supply | Optional |
Quick start guide | Yes |
1x Din rail bracket | Yes |
1x two pin power connector | Yes |
2x Wi-Fi antenna | SC21, SC25a |
2x Cellular antenna with 1.5m cable | SC24a, SC25a |
The hardware specifications list was valid at the time this manual was published. The listed components are subject to change at any time, as Barracuda Networks may change hardware components due to technological advancements. Therefore, the list may not reflect the current hardware configuration of the Barracuda Networks appliance it was delivered with.
Status LEDs
Your appliance is equipped with a variety of LEDs. The table below shows the different glowing states.
Color | Status | Meaning installation |
|---|---|---|
All LEDs Off | Off | Appliance is powered off or installation has not initialized far enough for LED control when installation is started. |
Power LED front side (blue) | Steady | Appliance is plugged in an powered on. |
VPN LED front side (green) | Steady | Appliance has VPN connection to CloudGen Access Controller. |
WAN LED front side (orange) | Steady | Appliance has a connection to the Internet. |
WWAN (cellular) (yellow) | Blinking | Appliance has a connection to provider. Only for models with WWAN module. |
PSU LEDs - (green) | Steady | PSU modules connected, power supply unit is up and running. |
Wi-Fi (AP or Client mode)
Specification | SC21 / SC25a |
|---|---|
Integrated Wi-Fi (IEEE 802.11b/g/n) | 2.4GHz (2412MHz-2462MHz) |
Certificates | FCC, CE, RED |
4G/LTE
Specification | SC24a (SN#>2246897) / SC25a (SN#>2185632) |
|---|---|
Frequencies (MHz) |
|
Data Rate |
|
SIM Interface | 3VDC 6 pin |
Certificates |
|
Antenna | |
Interface | SMA |
Frequency Range (MHz) | 824 - 960; 1710 - 2170 |
Input Impedance (Ohm) | 50 |
Gain (dBi) | 3.5 |
Polarization Type | Linear, Vertical |
Radiation Direction | Omni-directional |
VSWR | <3.5 |
Length (mm) | 111 |
Cable Length (mm) | 1500 |
Contact Us
Barracuda Campus
Barracuda Support