Integrating F5 BIG-IP
These instructions can also be found on the f5 website.
Applies To
Product: BIG-IP, BIG-IP AAM, BIG-IP AFM, BIG-IP APM, BIG-IP ASM, BIG-IP DNS, BIG-IP GTM, BIG-IP Link Controller, BIG-IP LTM, BIG-IP PEM
15.X.X, 14.X.X, 13.X.X, 12.X.X, 11.6.X, 11.5.X
Product: Legacy Products, BIG-IP WebAccelerator, BIG-IP WOM, BIG-IP PSM, BIG-IP Edge Gateway
15.X.X, 14.X.X, 13.X.X, 12.X.X, 11.6.X, 11.5.X
Adding a remote syslog server using the Configuration utility Performing the following procedure should not have a negative impact on your system.
Adding remote syslog servers using the Configuration utility is available in BIG-IP 11.1.0 and later.
Log in to the Configuration utility.
Click System > Logs > Configuration > Remote Logging.
For Remote IP, enter the destination syslog server IP address, or FQDN. (DNS server configuration required)
For Remote Port, enter the remote syslog server UDP port (default is 514).
(Optional) For Local IP, enter the local IP address of the BIG-IP system.
Select Add.
Select Update.
For BIG-IP systems in a high availability (HA) configuration, perform a ConfigSync to synchronize the changes to the other devices in the device group.
Contact Us
Barracuda Campus
Barracuda Support