Integrating Juniper Secure Services Gateway (SSG) Firewall

Prerequisite: Configure the Syslog for Juniper Secure Services Gateway firewall at Juniper Secure Services Gateway firewall.

To integrate Juniper Secure Services Gateway firewall, perform the following steps.

1. At the Barracuda XDR Dashboard, click Administration > Integrations.
   The Integrations page is displayed.
   
   
   

   Open

   

2. Scroll to the Juniper Secure Services Gateway firewall card and then click Setup.
   
   
   

   Open

   

   The Enable page is displayed.
   
   
   

   Open

   

3. Select Enabled.
   The selected check box is displayed.
   
   
   

   Open

   

4. Click Save.