F600 Revision B
Warranty and Safety Instructions
Opening your Barracuda Networks appliance or removing its warranty label unless instructed to do so by Barracuda Networks support will void your warranty and hardware support.
Always use the power supply shipped with the appliance.
Default Port Configuration
Label | OS Notation | Speed/Type (Revision B) | Type | Management Port |
|---|---|---|---|---|
PORT1 | port1 | 10/100 MBit RJ45 | built in | X |
PORT2 | port2 | 10/100/1000 MBit RJ45 | built in |
|
PORT3 | port3 | 10/100/1000 MBit RJ45 | built in |
|
PORT4 | port4 | 10/100/1000 MBit RJ45 | built in |
|
PORT5 | port5 | 10/100/1000 MBit RJ45 | built in |
|
PORT6 | port6 | 10/100/1000 MBit RJ45 | built in |
|
PORT7 | port7 | 10/100/1000 MBit RJ45 | built in |
|
Parameters and availability of ports 9 to 12 are in Revision C and dependent on the unit's configuration.
Field Replaceable Modules
BARRACUDA NETWORK MODULE M801 (8 Copper)
OS Notation | Speed/Type (Revision B) |
|---|---|
portB1 | 10/100/1000 MBit RJ45 |
portB2 | 10/100/1000 MBit RJ45 |
portB3 | 10/100/1000 MBit RJ45 |
portB4 | 10/100/1000 MBit RJ45 |
The F600 Revision C unit no longer provides the option to mount field replaceable modules. Therefore, the F600 Revision C is currently available as a standard model with 8+4 RJ45 copper modules. F600 Rev. C with built-in 8 RJ45 copper and 4 SFP or 2 SFP+ modules will shortly be available as an order option (currently planned for July 2013). Please contact your local sales representative or local partner for details.
BARRACUDA NETWORK MODULE M802 (4SFP1G)
OS Notation | Speed/Type (Revision B) |
|---|---|
portB1 | 1 GbE Fibre SFP |
portB2 | 1 GbE Fibre SFP |
portB3 | 1 GbE Fibre SFP |
portB4 | 1 GbE Fibre SFP |
The F600 Revision C unit no longer provides the option to mount field replaceable modules. Therefore, the F600 Revision C is currently available as a standard model with 8+4 RJ45 copper modules. F600 Rev. C with built-in 8 RJ45 copper and 4 SFP or 2 SFP+ modules will shortly be available as an order option (currently planned for July 2013). Please contact your local sales representative or local partner for details.
BARRACUDA NETWORK MODULE M803 (2SFP10G)
OS Notation | Speed/Type (Revision B) |
|---|---|
portB1 | 10 GbE Fibre SFP |
portB2 | 10 GbE Fibre SFP |
The F600 Revision C unit no longer provides the option to mount field replaceable modules. Therefore, the F600 Revision C is currently available as a standard model with 8+4 RJ45 copper modules. F600 Rev. C with built-in 8 RJ45 copper and 4 SFP or 2 SFP+ modules will shortly be available as an order option (currently planned for July 2013). Please contact your local sales representative or local partner for details.
Hardware Specifications
Component | Specifications |
|---|---|
CPU | Intel Dual Core |
Memory | 4 GB |
Mass Storage (formatted) | 1 x 500 GB HDD |
Flash Disk | 128 MB |
LCD Module | 2 x 20 characters |
USB | 2x USB 2.0 |
Form Factor | 1U rack mount |
Dimensions (W/D/H) | 42,6 x 39,6 x 4,4 cm |
Net Weight | 5.4 kg / 12 lbs |
Power Supply | Single, internal |
Power Supply Input Voltage | 100 - 240 V, AC |
Power Supply Voltage | 47 Hz - 63 Hz |
Power Supply Watts | 220 W |
Storage Temperature | -20 °C - +70 °C |
Operation Temperature | 0 °C - 40 °C |
Relative Humidity | 5% - 95%, non-condensing |
Certifications | CE, FCC, ROHS |
The hardware specifications list was valid at the time this manual was published. The listed components are subject to change at any time, as Barracuda Networks may change hardware components due to technological advancements. Therefore, the list may not reflect the current hardware configuration of the Barracuda Networks NextGen Firewall or NextGen Control Center appliance it was delivered with.
Status LED
Your appliance is equipped with a variety of LEDs. One of them is the Status LED. It is labeled either with a heart symbol or the term Status. It indicates the appliance’s operational state by changing colors between green, orange and red, and by changing between blinking and steady glowing. The table below shows the different meanings of the different glowing states.
Color | Glowing State | Meaning: Installation | Meaning: Normal Operation or Active Recovery Technology (ART) Operation |
|---|---|---|---|
Off | Off | Appliance is powered off or installation has not initialized far enough for LED control when installation is started. | Appliance is powered off. |
Green | Blinking | Normal installation. | Appliance is either booting, shutting down, or performing a system update. |
Green | Steady | Installation was completed successfully. Appliance is halted for reboot or installation was not yet initialized far enough for LED control. | Barracuda NextGen Firewall is up and running. |
Red | Blinking | Error during installation. | An error has occurred, preventing the Barracuda NextGen Firewall from entering the up state. |
Red | Steady | - | Appliance is halted and may be disconnected. |
Orange | Blinking | - | - |
Orange | Steady | - | Appliance is in ART mode. |
Not all appliances support orange and/or red LED colors. Depending on the appliance type, the status LED might be on by default, and it might take some time during boot and installation to start either blinking or changing the color. Furthermore, the status LED might blink at different frequencies.
Serial Console Port
In order to establish a console connection to the appliance using a serial cable (Revision A: DB9, other revisions: RJ45), you need to configure the serial port on the terminal using the following parameters:
Parameter | Value |
|---|---|
Baud | 19200 |
Bits | 8 |
Stop bit | 1 |
Parity | None |
Handshake | None |
LCD Display
Navigating
This security appliance features a key pad with four keys and an LCD panel on the left side of the front panel. These may be used to obtain certain information and to perform certain commands directly on the appliance.
Key | Command |
|---|---|
Left or Escape | Navigates back or acts like an Escape key while working in the LCD menu. |
Up | Navigates up or increases a value. |
Down | Navigates down or decreases a value. |
Right or Enter | Navigates forwards or acts like an Enter key for confirming a configuration step. |
LCD Display Menu
You may use the LCD display and the keypad to access certain appliance features. Use the up and down keys to navigate through the items of the main menu.
The LCD menu features the following items from top to bottom:
Menu | Meaning |
|---|---|
Appliance type, OS version, and release number | This is the default display. |
IP address and subnet mask | Shows the configured IP address and subnet mask of the appliance. |
Time and date | Shows time and date currently configured on the appliance. |
Uptime of Barracuda OS | The uptime in days, hours, and minutes. |
Serial number of the appliance | Unique identifier for the appliance. |
Shutdown menu | Enables you to shut down the appliance. |
Reboot menu | Enables you to reboot the appliance. |
Menu to change the management IP address | Configure the IP address for the management port. |
Menu to boot intoi ART during the next reboot | Enables you to set a flag that will cause the appliance to boot into ART the next time it is rebooted. |