Connecting BarracudaONE to Cisco Umbrella

Connect BarracudaONE to Cisco Umbrella through the No tool for AI usage monitoring security risk.

You’ll need to collect certain information about the Cisco Umbrella before connecting it to BarracudaONE. See the Requirements section for details.

Requirements

The connection between BarracudaONE and Cisco Umbrella requires the following information:

• S3 Bucket path

• Access Key

• Secret Key

To collect required information

1. Log in to Cisco Umbrella and select Admin > Log Management.

2. Select Use a Cisco-managed Amazon S3 bucket.

3. Configure the data retention settings and click Save.

4. Copy the following and store them in an accessible place to use in the connect To BarracudaONE to Cisco Umbrella procedure below:

   • S3 Bucket path

   • Access Key

   • Secret Key

5. Proceed to the To connect BarracudaONE to Cisco Umbrella procedure below.

To connect BarracudaONE to Cisco Umbrella

1. In the left navigation menu, select Home .

2. In the Start mitigating risks section, do one of the following:

   • Select the No tool for AI usage monitoring risk.

   • Select another risk, then use the arrows to navigate to the No tool for AI usage monitoring risk.

3. In the Resolution criteria section, select Enable discovery .

4. Select Use Cisco Umbrella, then click Continue.

5. If you haven’t already collected the required data, follow the To collect required information procedure above, then click Continue.

6. Enter the following information:

   • S3 Bucket path

   • Access Key

   • Secret Key

7. Select your Region.

8. Click Connect.

After the tests pass, Cisco Umbrella is connected to BarracudaONE.