Integrating Barracuda Intrusion Detection System (IDS)

If you are using a physical or virtual sensor, contact the XDR Enablement team.

To set up Barracuda Intrusion Detection System (IDS), do the following:

• Enable Barracuda IDS

• Install the XDR Collector

Enable Barracuda IDS

1. In Barracuda XDR Dashboard, navigate to Integrations .

2. On the Barracuda IDS card, click Setup.

   Open

   

3. Select the Enabled check box.

   Open

   

4. Click Save.

Install the XDR Collector

When collecting logs from one or more applications, always set up the XDR Collector on a dedicated host server. Don't use an existing server because the amount of data produced by logs can impact critical infrastructure.

• If you haven't already set up the XDR Collector, do one of the following:

  • Setting up the XDR Collector for Barracuda IDS for Windows

  • Setting up the XDR Collector for Barracuda IDS for Linux